 |
NARSTO Workshop on Innovative Methods for Emission Inventory Development and Evaluation University of Texas, Austin October 14-17, 2003 |
 |
A Passive Flux Denuder for Evaluating Emissions of Ammonia at a Dairy Farm
Dennis R. Fitz
College of Engineering-Center for Environmental Research and Technology,
University of California, Riverside, CA 92521
John T. Pisano
College of Engineering-Center for Environmental Research and Technology,
University of California, Riverside, CA 92521
Passive samplers have been shown to be an inexpensive alternative to direct sampling. Diffusion denuders have been developed to measure the concentration of species such as ammonia, which is in equilibrium with particulate ammonium nitrate. Conventional denuder sampling has required active sampling that inherently requires air pumps and therefore electrical power. To estimate emissions of ammonia from a fugitive source would require and array of active samplers and meteorological measurements to estimate the flux. A recently developed fabric denuder was configured in an open tube to passively sample ammonia flux. Passive and active samplers were collocated at a dairy farm at the California State University, Fresno, Agricultural Research Facility. During this comparison study ammonia flux measurements were made at the dairy farm lagoon before and after the lagoon underwent acidification. Comparisons were made of the flux measurements obtained directly from the passive flux denuder and those calculated from an active filter pack sampler and wind velocity. The results show significant correlation between the two methods, although a correction factor needed to be applied to directlyy compare the two techniques.This passive sampling approach significantly reduces the cost and complexity of sampling and has the potential to economically develop a larger inventory base for ambient ammonia emission